Contact US: angel@mintaialuminum.com

You are here:  >  Products  >  Aluminum Sheet products  >  5052 Aluminum Sheet

5052 Aluminum Sheet

5052 aluminium sheet

5052 aluminum sheet is Al-Mg alloy aluminum sheet,it is one of the antirust aluminum, the alloy have the high strength,especial fatigue strength,plasticity and high corrosion resistance,
it can not heat treatment strengthening,when it is in a half cold work hardening the plasticity is very good,then in fully cold workinghardening the plasticity is low. The alloy of 5052 have good corrosion resistance,good weldability, but it's cutting performance is bad,it can be polished.

5052 Aluminium sheet description
  • Alloy:5052
  • Temper:H32,H34,H38,H111,H112,H114,HO
  • Mother coil:DC
  • Thickness:0.5-6.0mm
  • Width:800-2300mm
  • Length:800-11000mm
  • Protection:paper inter layer,white film,blue film,black-white film,micro bound film,
  • according yo your requirement.
  • Surface:clean and smooth,no bright speck,corrosion,oil,slotted,etc.
  • Weigth:about 2mt per pallet
  • Package:export standard package,wooden pallet with fumigation
  • Delivery time:about 30days after receiving the deposit
  • Payment:TT
  • Trading terms:FOB,CIF,CFR
  • Product standard:GBT,JIS ,EN,ASTM
  • We can supply the Form E, Form A,CO and so on

5052 Aluminium sheet chemical composition
  Si Fe Cu Mn Mg Cr Zn TI
GBT/3190-2008 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.1 0.1
Inner quality standard 0.15 0.28-0.38 0.05 0.10 2.2-2.4 0.18-0.25 0.05 0.01-0.018

5052 Aluminium sheet mechanical properties
Thickness(mm) Tensile strength(Mpa) Yield strength(Mpa) Elongtion(%)
0.5-1.5 210-260 130 6
1.51-3.0 210-260 130 7
3.01-6.0 210-260 130 10
 

5052 Aluminium sheet tolerance requirement
  • Total weight: +/-10%
  • Thickness:+/-1%  for sheet(1-6mm),+/-2%for plate(6.1-150mm)
  • Width:+2/-0mm for sheet,+4/-0mm for plate
  • Length:+3/-0mm for sheet,+4mm/-0mm for plate

 5052 Aluminium sheet properties
  • medium tenacity
  • good corrosion resistance
  • lower density
  • high tensile strength
  • high elongation
5052 Aluminium sheet purpose
1.Widely used in making conductor,cookware,dash board,flooring,shell, building trim,construction materials,voiture materials
2.used in construction material and building material.Including:roof panel,ceiling,in-wall, partition wall,shutters,window blind,gate,balcony,wall,road marking,street signs,road 
protecting plate,highway protecting plate,bridge of barrier wall,scaffold,ship plate,etc.

Another alloy Aluminium sheet
Chemical Properties
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ca V Ti Other Min.A1
1050 0.25 0.4 0.05 0.05 0.05 - - 0.05 - 0.05 0.03 0.03 99.5
1060 0.25 0.35 0.05 0.03 0.03 - - 0.05 - 0.05 0.03 0.03 99.6
1070 0.25 0.25 0.04 0.03 0.03 - - 0.04 - 0.05 0.03 0.03 99.7
1100 0.95 0.05-0.2 0.05 - - - 0.1 - - - 0.05 99
1200 1.00 0.05 0.05 - - - 0.1 - - 0.05 0.05 99
3003 0.6 0.7 0.05-0.2 1.0-1.5 - - - 0.1 - - - 0.15 Remainder
3004 0.3 0.7   0.25 1.0-1.5 0.8-1.3 - - 0.25 - - - 0.15 Remainder
3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.2 - 0.4 - - 0.1 0.15 Remainder
3005 0.6 0.7 0.3 1.0-1.5 0.2-0.6 0.1 - 0.25 - - 0.1 0.15 Remainder
3A21 0.6 0.7 0.2 1.0-1.6 0.05 - - 0.1 - - 0.15 0.15 Remainder
3104 0.6 0.8 0.05-0.25 0.8-1.4 0.8-1.3 - - 0.25 - - 0.1 0.15 Remainder
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.1 - 0.25 - - - 0.05 Remainder
5083 0.4 0.4 0.1 0.4-1.0 4.0-4.9 0.05-0.25 - 0.25 - - 0.15 0.05 Remainder
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 - 0.1 - - - 0.05 Remainder
5182 0.2 0.35 0.15 0.2-0.5 4.0-5.0 0.1 - 0.25 - - 0.1 0.05 Remainder
5754 0.6 0.7 0.05-0.2 1.0-1.5 - - - 0.1 - - - 0.05 Remainder
6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 - 0.25 - - 0.15 0.05 Remainder
7075 0.4 0.5 1..2-2.0 0.3 2.1-2.9 0.18-0.28 - 5.1-6.1 - - 0.2 0.05 Remainder