8011 Aluminum Sheet
8011 Aluminium sheet description
- Alloy:8011
- Temper:HO,H18,H14,H24
- Thickness:0.15mm-6.0mm
- Width:80mm-2300mm
- Length:100-11000mm
- Standard production:ASTM-B-209M,BS EN 485-2,BS EN 573-3,GB/T3880-2008
- MOQ:5 tons per size
- Mother coil:DC or CC
- Surface:Mill finishing,mirror finishing,
- Package:Export standard package with wooden pallet
- Delivery time:within 30days
- Origin:China
- Certificate: Mill Test Certificate,Certificate of origin:Form A,Form E,CO
8011 Aluminium sheet alloy composition
GB/T3190-2008
| alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al.min |
| 8011 | 0.4-0.8 | 0.5-1.0 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.05 | Rem. |
Inner quality standard:
| alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al.min |
| 8011 CC | 0.6-0.66 | 0.7-0.78 | 0.03 | 0.03 | 0.03 | 0.01 | 0.01 | 0.015-0.025 | Rem. |
| 8011 DC | 0.6-0.65 | 0.75-0.8 | 0.04-0.09 | 0.08 | 0.05 | - | 0.05 | 0.02-0.03 |
Rem. |
8011 aluminum sheet mechanical properties
| Tensile strength(Mpa) | Yield strength(Mpa) | Elongtion(%) |
| 125-165 | 110 | 2-5 |
8011 Aluminium sheet application
1. decoration, ceilings, curtain wall, chemical product container, alloy doors and windows, transport equipment parts,
fuel tanks, conduit, kitchen countertops and so on.
2.To make aluminium caps,cooling fin,food packing material, hot sealing ,heat exchanger and condensator for A/C.
Another alloy aluminium sheet
Chemical Properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
| 1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | - | 0.1 | 0.15 | Remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | - | - | 0.1 | - | - | 0.15 | 0.15 | Remainder |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | - | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | 0.05 | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | Remainder |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | - | 0.1 | 0.05 | Remainder |
| 5754 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | Remainder |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
| 7075 | 0.4 | 0.5 | 1..2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | - | 0.2 | 0.05 | Remainder |
