You are here:
>
Products
>
Aluminum Tread Plate
>
Three bar Aluminium tread plate/3 bars Aluminium alloy checker plate/3 bars Aluminium chequered plate
Three bar Aluminium tread plate/3 bars Aluminium alloy checker plate/3 bars Aluminium chequered plate
Three bar aluminium tread plate is called corridor aluminum tread plate, anti-skid aluminum tread plate,rust-proof aluminum tread plate.
Specifications of three bar aluminum tread plate
- Grade:1050,1060, 1100, 3003, 3105, 5052,5005,5754 etc.
- Thickness: 1mm-6mm
- Width: 2200mm max.
- Length: 12000mm max.
- Temper:H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38, O etc.
- Pattern:3 bar aluminium tread plate
- Tread height: 0.8mm-1.5mm
- Tread length: 32mm-50mm
Packing of three bar aluminum tread plate
- Each coil to be securely tied with three bandings.
- The contact points of these bandings on the coil edge to be protect with edge protectors.
- Coil then to be properly wrapped with plastic film, woven belt, resistant paper.
- Wooden or iron pallet can be used or as your requirements
Applications of three bar aluminum tread plate
- Ship deck
- Autos
- Workshop floors
- Building floors and steps
- Antiskid floor of bus
- Elevator
- Treadboard
- Stair tread
- Vehicle step
- Automotive interior and exterior decoration
- Interior decoration: such as photo frame
- Household appliances, refrigerator, microwave oven, audio equipment, etc.
- Aerospace and military aspects, such as satellite.
- Machinery parts processing, mold manufacturing.
- Chemical/insulation pipeline coating
Manufacturing technique three bar aluminium tread plate
Method one:Mother coil⇒rollng milling and embossing by cold roller⇒Cleaning with cleaning oil ⇒Oil control⇒Annealing⇒Cutting⇒Packaging
Method two:Mother coil⇒rolling milling ⇒Annealing⇒ embossing by cold roller⇒Cleaning with cleaning oil ⇒Oil control⇒Cutting⇒Packaging
- Light in weight
- Convenient assembling
- Disassembling
Detailed specifications of aluminum tread plate
1)Temper
| Tread Temper | Normal Temper | Tread Temper | Normal Temper |
| H114 | O | H164 | H15 |
| H264 | H25 | ||
| H364 | H35 | ||
| H124 | H11 | H174 | H16 |
| H224 | H21 | H274 | H26 |
| H324 | H31 | H374 | H36 |
| H134 | H12 | H184 | H17 |
| H234 | H22 | H284 | H27 |
| H334 | H32 | H384 | H37 |
| H144 | H13 | H194 | H18 |
| H244 | H23 | H294 | H28 |
| H344 | H33 | H394 | H38 |
| H154 | H14 | H195 | H19 |
| H254 | H24 | H295 | H29 |
| H354 | H34 | H395 | H39 |
2)Chemical composition
| Chemical Composition(mass fraction)% | ||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Other | Ti | Ai |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | V0.05 | 0.03 | 99.6 | |
| 1100 | Si+Fe0.95 | 0.05-0.2 | 0.05 | 0.1 | 99 | |||||
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1-1.5 | 0.1 | Remain | ||||
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.5 | 0.2-0.8 | 0.2 | 0.4 | 0.1 | Remain | |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | Remain | ||
| 5083 | 0.4 | 0.4 | 1 | 4-5 | 0.05-0.25 | 0.25 | 0.15 | Remain | ||
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | Mn+Cr 0.1-0.6 | 0.15 | Remain |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | Rem | |
