How to Identify the Quality of Aluminum Composite Panel / Aluminum Sheet_Henan Mintai Aluminum Industrial Co., Ltd

Products

You are here: > News > How to Identify the Quality of Aluminum Composite Panel

How to Identify the Quality of Aluminum Composite Panel

Aluminum Composite Panel (ACP) is made up of two layers of aluminum skin on the top and bottom, and one layer of anti-toxic polyethylene material in the core. Also the skin surfaces can be coated with special paint material like PVDF resin or Polyster resin under a specific temperature condition.

In recent years, the aluminum composite panel has entered the home decoration, which is widely used in the decoration industry because of its smooth surface, colorful, impact-resistant, clean and convenient, durable and fast construction.But how to identify the quality of aluminum composite panel become a problem.

Here are some simple methods to identify the quality:

1.Look over the surface of the panel, it must be smooth, no corrugation, without bubbling, flaw, nick;

2.Measure the panel, it should reach to the International Standard: Interior panel 3mm, Exterior panel 4mm;

3.Bend the corner of the panel, if easy to be ruptured, it is not real PE or bad PE;

4.Light the PE, if it is completely burned, it’s real PE; if impurity exists, it is bad PE;

5.Slot the panel, if it is ruptured, it is bad;

6.Drop a blob of Methyl Ethyl Ketone on exterior panel(PVDF), then rub out the reagent after 5mm inutes, if see the aluminum skin, it is not PVDF coating;

7.Drop a blob of Xylene on interior panel(Polyester), then rub out the reagent after 5 minutes, if see the aluminum skin, it is not Polyester coating;

8.Ask for Quality Test Report and Warranty Certificate, ISO-9001 Quality System Certificate, which normal manufacturers obtained these certificates.

In generally aluminum composite panel is widely used in Wall Curtain, Cladding and Facade Roof edges and Parapet wall; Dado, Separion Wall and Partition Advertising Board, Showroom and Shopfront Siging, Column Covers and Beam Wraps.

If any needs on aluminum composite panel, just freely contact us:

Henan Mintai Al. Industrial Co., Ltd