You are here:
>
News
>
How to Install Aluminum Alloy Lath Ceiling
How to Install Aluminum Alloy Lath Ceiling
Aluminum bars ceiling installation steps: install suspension shaft, nine keels, batten keel, batten, mounted on the wall, in the absence of a large keel is removed, the keel of a step. The loading method with suspenders and large light steel keel ceiling keel as following:
1 batten keel
The slat keel hanger on keel or fixed in the boom (no keel when), the slat keel handed, hanging pendant at the lower end of the buckle slat keel.
2 batten
The aluminum plate bars up to two, loss of 6 hanging side buckle in the lower part of the flange plate keel. As with the slot plate, the slot plate embedded strip joints.
3 mounted on wall panels
On the wall before or after installation should be constructed according to the fixed plate. By the wall panels can be used to embed in the wall of the hole, can also be drilled into the wall, into the plastic tube, after the wall plate in place, with screws screw into the tube, so that by the wall panel.
1 batten keel
The slat keel hanger on keel or fixed in the boom (no keel when), the slat keel handed, hanging pendant at the lower end of the buckle slat keel.
2 batten
The aluminum plate bars up to two, loss of 6 hanging side buckle in the lower part of the flange plate keel. As with the slot plate, the slot plate embedded strip joints.
3 mounted on wall panels
On the wall before or after installation should be constructed according to the fixed plate. By the wall panels can be used to embed in the wall of the hole, can also be drilled into the wall, into the plastic tube, after the wall plate in place, with screws screw into the tube, so that by the wall panel.
