You are here:
>
News
>
How to operate 2450 Cold rooling to make aluminum coil
How to operate 2450 Cold rooling to make aluminum coil
Aluminum produce line 2450 cold rolling
An open-book manipulation
5.1 with crown put blank light loading stage, with the cart on the billet to uncoiling machine.
5.2 coiler tension bridle roll, set in.
5.3 pressure roller pressure coil, cut off the strip, with the shovel head machine scooping up coil head, into the feed roller.
5.4 with pressure roller and the feed roller with coil head into the roll, pressure roller and the feed roller to return.
5.5 coil head is after the roll bite, open process oil, absorption roller, at the same time to the tension.
Coiling operation
6.1 and feeding dolly on the reel on the sleeve, sleeve.
6.2 to start the help volume, make the belt tightening around the sleeve, rose will guide.
6.3 take the lead to cut shears, manipulation of the hand according to the situation to decide whether to cutting head or cutting head.
After 6.4 take the lead to help roll machine, the front tension, then drop guide plate, strip tightening around after return to roll, then can speed up.
6.5 coil render part to flat, neat, like the base part shadow or have sharp bumps, to cut off to coiling.
6.6 after the coil rolling, feeding dolly will take roll off, and put on the loading volume;Steel belt to bundle tight bundle is writing, batch number, type, specification, to indicate the weight after weighing and indicate the process, such as handsomer rewinding machine, pull, annealing, etc
