5005 Aluminium sheet
![5005 aluminum sheet](/uploads/allimg/170518/1-1F51Q5050cB.jpg)
5005 Aluminium sheet description
- Alloy:5005
- Temper:H34,H32, H38,H111,H112
- Mother coil:DC
- Thickness:0.5-6.0mm
- Width:800-1700mm
- Length:800-10000mm
- Protection:paper inter layer,white film,blue film,black-white film,micro bound film,
- according yo your requirement.
- Surface:clean and smooth,no bright speck,corrosion,oil,slotted,etc.
- Weigth:about 2mt per pallet
- Package:export standard package,wooden pallet with fumigation
- Delivery time:about 30days after receiving the deposit
- Payment:TT
- Trading terms:FOB,CIF,CFR
- Product standard:GBT,JIS ,EN,ASTM
- We can supply the Form E, Form A,CO and so on
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
standard value | 0.3 | 0.3 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | - | rem. |
inner value | 0.2 | 0.5-0.65 | 0.1 | 0.1 | 0.6-0.7 | - | 0.05 | 0.015-0.02 | rem. |
5005 Aluminium sheet tolerance requirement
- Total weight: +/-10%
- Thickness:+/-1% for sheet(1-6mm),+/-2%for plate(6.1-150mm)
- Width:+2/-0mm for sheet,+4/-0mm for plate
- Length:+3/-0mm for sheet,+4mm/-0mm for plate
- Medium tenacity
- Good corrosion resistance
- Lower density
- High tensile strength
- High elongation
5005 aluminum sheet is Widely used in making conductor,cookware,dash board,flooring,shell,aluminium shutter, building material,both inside and outside material,construction materials,voiture materials.
- Interior:wall cladding,ceilings,bothrooms,kitchens and balconies,shutters,doors,curtain wall
- Exterior:wall cladding,facades,roofing,camopies,tunnels,column cover,renovations
- Advertisement:display platforms,signboards,fascia,shop fronts
Another alloy aluminium sheet
Chemical Properties
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | - | 0.1 | 0.15 | Remainder |
3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | - | - | 0.1 | - | - | 0.15 | 0.15 | Remainder |
3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | - | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | 0.05 | Remainder |
5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | Remainder |
5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | - | 0.1 | 0.05 | Remainder |
5754 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | Remainder |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
7075 | 0.4 | 0.5 | 1..2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | - | 0.2 | 0.05 | Remainder |