You are here:  >  Products  >  Medical Foil  >  PTP aluminum,PTP Blister foil,Pharmaceutical Blister Packagin

PTP aluminum,PTP Blister foil,Pharmaceutical Blister Packagin

PTP Blister foil
Alloy:8011
Temper:H18

Width: 100--1000mm
Thickness: 20mics, 25mics and 30mics etc
Core ID: 76 mm, paper core;
Roll OD: as purchasing order.
Sealent:Heat sealable lacquer coating wt. : 3-5GM, coating   surface ( dull or bright will be as per purchase order . ( Coating gsm   options available 6-8 ).

Certificate: TDS, COA, ISO9001,
Pharmaceutical Blister Packaging Materials: PTP Blister Foil, Blister Lid Foil, un-printed surface, with primer/ varnish coating for off-line printing in your factory.

PTP blister foil is the abbreviation of "Press through Packing", in Europe, "PTP" is called "Press through Foil", in China, PTP blister foil is named "Pharmaceutical PTP blister foil", PTP blister foil is also Known as blister foil or push-on lid foil for heat sealing with PVC, PVDC, PP for pharmaceutical use in blister packaging processes such as capsules, tablets, pills, etc.

The basic configuration of PTP aluminum foil is protective layer (OP)/printing ink/aluminum foil base material (AL)/adhesion (VC).

PTP blister foil has the characteristics of oxygen resistance, moisture-proof, leak-proof, pollution-proof, light-proof, light weight, high tensile strength, low shrinkage rate, and a certain degree of tamper resistance, and PTP blister foil can be easily used in automated production lines. cut. , The easy crushing property of PTP blister foil, compared with other packaging materials, ensures that the medicine can be easily taken out.

Application and use of PTP blister foil
Blister packaging for chewing gum, mints, etc.
Blister packaging for tablets, capsules, softgels, etc.
Blister packaging for healthcare products such as tablets, capsules, soft gels

Structure:(Printed)
The first layer: overpaint, protect printing, ensure ink fastness, not easy to peel off.
 
Second layer: ink, text and information printing.
 
The third layer: aluminum foil, the thickness can be 20mics, 25mics and 30mics
 
The fourth layer: heat sealing paint, PVC, PVDC or other materials heat sealing.

Structure:(Unprinted)
The first layer: overpaint, protect printing, ensure ink fastness, not easy to peel off.
 
Second layer: ink, text and information printing.
 
The third layer: aluminum foil, the thickness can be 20mics, 25mics and 30mics
 
The fourth layer: heat sealing paint, PVC, PVDC or other materials heat sealing.