7a03 7a04 Aluminum Material
7a03 Aluminum Material
1.Features and application
7a03 is the aluminum alloy for rivet., which can be hardening by heat treatment, has a high shear strength in normal temperature good corrosion resistance, 7a03 is unlimited by the time of heat treatment. 7a03 is widely used for fixtures, truck, tower building, pipeline and other needs to have strength, weldability and corrosion resistance of building on the field of application.
2.Temper:T6
3.Chemical compostion(%)
| Cu | Mg | Zn | Mn | Ti | Cr | Fe | Al |
| 1.8-2.4 | 1.2-1.6 | 6.0-6.7 | ≤0.10 | 0.02-0.08 | ≤0.05 | 0.2 | Remain |
4.Physical properties:Shear strength T(MPa)≥284
5.Sample size: All wire diameter
6.Heat treatment:Full annealing:390～430℃ heating; with the different material thickness, the soaking time stay between 30℃/hand 50℃/h. When the furnace cooling under 150℃, it will be changed into air cooling.
7a04 Aluminum Material
1.Features
7a04 aluminum alloy is the superhard aluminum, whcih belongs to high strenght alloy, can be deal with heat treatment. The strength is higher than the common aluminum when it is used as the state of quenching
2.Temper:H112, T6
3.Chemical compositon(%)
| Al | Si | Cu | Mg | Zn | Mn | Ti | Fe |
| Remain | ≤0.50 | 1.4-2.0 | 1.8-2.0 | 5.0-7.0 | 0.2-0.6 | ≤0.10 | 0.5 |
4.Physical properties
Tensile strength σb (MPa)：≥530
Yield strength σ0.2 (MPa)：≥400
Elongation δ10 (％)：≥5
5.Sample size:All thickness
6.Heat treatment:1.Homogeneizing(diffusion annealing):450～465℃ heating; 12～14h heat preservation; 2.Full annealing:390～430℃ heating; 30～120min.
