Aluminum 6061 T6
![](/uploads/allimg/170228/1-1F22Q61955554.jpg)
6061 available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged), which is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements.
Aluminum 6061 Chemical Compostion(%)
- Al 95.8 - 98.6
- Cr 0.04 - 0.35
- Cu 0.15 - 0.4
- Fe Max 0.7
- Mg 0.8 - 1.2
- Mn Max 0.15
- Si 0.4 - 0.8
- Ti Max 0.15
- Zn Max 0.25
- Other each Max:0.05
- Other, total Max:0.15
Aluminum 6061 T6 Mechanical Properties
- Tensile strength of at least:290 MPa (42,000 psi)
- Yield strength of at least:240 MPa (35,000 psi)
- More typical values are 310 MPa (45 ksi) and 270 MPa (39 ksi)
- Thickness in 6.35mm or less, it has elongation of 8% or more
- In thicker sections, it has elongation of 10%
- Electrical Resistivity 3.99e-006 ohmcm
- CTE, linear 68°F 23.6 μm/m-°C
- CTE, linear 250°C 25.2 μm/m-°C
- Thermal Conductivity 167 W/m-K
- Melting Point 582 - 652 °C
Aluminum 6061 Application
Aluminum 6061 alloy is widely used for Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts; bike frames.
Different forms and tempers of 6061 aluminum alloy
- ASTM B 209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- ASTM B 210: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- ASTM B 211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM B 308: Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
- ASTM B 483: Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
- ASTM B 547: Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
- ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates